| 7214.10.00
|
Forged |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
-- |
| 7214.10.00.00
|
Forged |
KGM |
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-7214.10.00 |
| 7214.20.00
|
Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-7214.10.00.00 |
| 7214.20.00.1
|
Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: |
|
|
|
Compare-7214.20.00 |
| 7214.20.00.11
|
With a maximum yield point of 400MPa |
KGM |
|
|
Compare-7214.20.00.1 |
| 7214.20.00.12
|
With a minimum yield point greater than 400MPa but not exceeding 500MPa |
KGM |
|
|
Compare-7214.20.00.11 |
| 7214.20.00.13
|
With a minimum yield point greater than 500MPa but not exceeding 600MPa |
KGM |
|
|
Compare-7214.20.00.12 |
| 7214.20.00.14
|
With a minimum yield point greater than 600MPa |
KGM |
|
|
Compare-7214.20.00.13 |
| 7214.20.00.2
|
Concrete reinforcing bar, of specification CSA G30.18, with a diameter of more than 12 mm but not exceeding 39 mm: |
|
|
|
Compare-7214.20.00.14 |
| 7214.20.00.21
|
With a maximum yield point of 400MPa |
KGM |
|
|
Compare-7214.20.00.2 |
| 7214.20.00.22
|
With a minimum yield point greater than 400MPa but not exceeding 500MPa |
KGM |
|
|
Compare-7214.20.00.21 |
| 7214.20.00.23
|
With a minimum yield point greater than 500MPa but not exceeding 600MPa |
KGM |
|
|
Compare-7214.20.00.22 |
| 7214.20.00.24
|
With a minimum yield point greater than 600MPa |
KGM |
|
|
Compare-7214.20.00.23 |
| 7214.20.00.3
|
Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm: |
|
|
|
Compare-7214.20.00.24 |
| 7214.20.00.31
|
With a maximum yield point of 400MPa |
KGM |
|
|
Compare-7214.20.00.3 |
| 7214.20.00.32
|
With a minimum yield point greater than 400MPa but not exceeding 500MPa |
KGM |
|
|
Compare-7214.20.00.31 |
| 7214.20.00.33
|
With a minimum yield point greater than 500MPa but not exceeding 600MPa |
KGM |
|
|
Compare-7214.20.00.32 |
| 7214.20.00.34
|
With a minimum yield point greater than 600MPa |
KGM |
|
|
Compare-7214.20.00.33 |
| 7214.20.00.90
|
Other |
KGM |
|
|
Compare-7214.20.00.34 |
| 7214.30.00
|
Other, of free-cutting steel |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-7214.20.00.90 |
htshub©