| 9937.00.00
|
Costumes, and parts and accessories thereof, designed or decorated in a manner reflecting a specific ethno-cultural heritage when for the use of an ethno-cultural group that requires the costumes for the public manifestation of its heritage.
"Goods" does not include goods that are sold or otherwise disposed of within 12 months after importation.
For the purpose of this tariff item, upon receipt of an application pursuant to section 88 of this Act, the Minister of Public Safety and Emergency Preparedness shall have regard for the following criteria in deciding whether to recognize a group as an ethno-cultural group:
(a) whether the group consists of at least five persons each of whom is at least 18 years of age and is a Canadian citizen or a permanent resident within the meaning of the Immigration Act, 1976;
(b) whether the group is a voluntary, non-profit group constituted for the purpose of preserving its ethno-cultural heritage and sharing that heritage with Canadians; and
(c) whether the group is supported by, and is a representative of, the ethnic community to which it belongs. |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
-- |
| 9938.00.00
|
Hand-loomed, hand-made or handicraft textile or apparel goods designated by the Minister, when certified by the Government of Mexico, the United States, Chile or Costa Rica or by any authority in Mexico, the United States, Chile or Costa Rica recognized by the Minister of Public Safety and Emergency Preparedness as competent for that purpose, to be:
(a) hand-loomed fabrics of a cottage industry,
(b) hand-made cottage industry goods made of such hand-loomed fabrics,
(c) traditional folklore handicraft goods, or
(d) indigenous handicraft goods.
|
|
N/A |
UST, MXT, CT, CRT: Free |
Compare-9937.00.00 |
| 9939.00.00
|
Items of official uniform dress or accoutrement, for use by personnel of militia regiments, purchased with regimental funds, that remain the property of the regiments. |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-9938.00.00 |
| 9945.00.00
|
Articles and materials, wholly or in chief part of metal, for use in the manufacture of the following:
Ball or roller bearings or parts thereof;
Boilers or parts thereof;
Captive balloons or parts thereof to be employed in logging;
Cylinder stave saws or parts thereof to be employed in sawmills;
Engines of heading 84.12 or parts thereof;
Freight cars, log skidders or motor vehicles for the transport of goods, or parts thereof, to be employed in logging;
Internal combustion piston engines or parts thereof, not including outboard motors or engines of a kind used for the propulsion of vehicles of Chapter 87 and parts thereof;
Machinery or parts thereof of Chapter 84 to be employed in logging;
Nuclear reactors or parts thereof;
Sand cast rolls or chilled cast rolls;
Saw blades to be employed in logging or in sawmills;
Steam turbines or parts thereof;
Trailers or parts thereof for self-propelled logging trucks;
Wheel type stave jointers, crozing machines or champhering machines, and parts thereof. |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-9939.00.00 |
| 9947.00.00
|
Articles and materials for use in the manufacture of diodes, transistors and similar semiconductor devices, photosensitive semiconductor devices (including photovoltaic cells whether or not assembled in modules or made up into panels), light emitting diodes, mounted piezo-electric crystals or electronic integrated circuits and microassemblies;
Machinery, apparatus and parts thereof to be employed in designing, developing, testing or manufacturing semiconductor devices, excluding water or waste treatment equipment, reverse osmosis equipment for demineralization or deionization of water, laminar flow clean air work stations, fume hoods, clean rooms, high efficiency particulate air filter modules, laminar flow modules, electronic work tables, room pressurization or air flow monitors, acrylic storage boxes, and parts of the foregoing. |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-9945.00.00 |
| 9948.00.00
|
Articles for use in the following:
Automatic banknote dispensers;
Goods of heading 84.71;
Automatic word-processing machines;
Chart recorders and other instruments for measuring or checking electrical quantities, designed for use with automatic data processing machines;
Electronic calculating machines;
Magnetic discs;
Numerical control panels with built-in automatic data processing machines;
Power supplies of automatic data processing machines, and units thereof, of heading 84.71;
Process control apparatus, excluding sensors, which converts analog signals from or to digital signals;
Video games used with a television receiver, and other electronic games;
Parts and accessories of the foregoing. |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-9947.00.00 |
| 9949.00.00
|
Articles and materials of Section XV or Chapter 85 and optical fibres, optical fibre bundles and cables, for use in the manufacture of carrier-current communications apparatus for the transmission of audio, supervisory control, telemetry or protection signals over power transmission lines. |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-9948.00.00 |
| 9950.00.00
|
Satellites and satellite subsystems imported for the purpose of being tested;
Articles and materials employed in the development, design, manufacture, testing, repair, modification or maintenance of satellites, satellite subsystems, space stations, space vehicles or other equipment to be employed in the upper atmosphere or in space;
Ground support and monitoring equipment for use with the foregoing.
|
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-9949.00.00 |
| 9952.00.00
|
Articles and materials, excluding anti-freezing preparations of heading 38.20 and goods of Chapter 40, for use in the manufacture of original equipment parts for all-terrain vehicles not exceeding a gross vehicle weight of 680 kg, of subheading 8703.21, and off-highway vehicles not exceeding a gross vehicle weight of 1,150 kg, of subheading 8704.21, 8704.31 or 8704.90, or for use as original equipment in the manufacture of such vehicles or chassis therefor. |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-9950.00.00 |
| 9953.00.00
|
Hydraulic equipment and articles for use therein;
Articles for use in compression-ignition internal combustion piston engines (diesel or semi-diesel engines);
All the foregoing for use in the manufacture of road graders or road scrapers. |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-9952.00.00 |
| 9958.00.00
|
Parts, accessories and articles, excluding tires and tubes, for use in the manufacture of original equipment parts for passenger automobiles, trucks or buses, or for use as original equipment in the manufacture of such vehicles or chassis therefor. |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-9953.00.00 |
| 9959.00.00
|
Materials of Section III, VI, VII, XI, XIII, XIV or XV or of Chapter 45 or 48, or electric conductors for a voltage exceeding 1,000 V (excluding winding wire and co-axial conductors), for use in the manufacture of passenger automobiles, buses, trucks, ambulances or hearses, or chassis therefor, or parts, accessories or parts thereof, other than rubber tires and inner tubes.
|
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-9958.00.00 |
| 9960.00.00
|
Machinery, precision instruments and apparatus, including control panels, accessories and attachments for use therewith, and parts of all the foregoing, excluding consumable tools:
(a) for the manufacture of motor vehicles, motor vehicle parts or motor vehicle accessories or parts thereof, or
(b) for the manufacture of
i) dies, jigs, fixtures, moulds or patterns therefor, or
ii) cutting tools or parts thereof, for use with machines,
used in the manufacture of motor vehicles, motor vehicle parts or motor vehicle accessories or parts thereof;
Production parts, attachments, accessories, tools, assemblies and subassemblies, and parts of the foregoing, for use in the manufacture of machinery used in motor vehicle production. |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-9959.00.00 |
| 9961.00.00
|
The following for use in the repair of road tractors for semi-trailers, motor vehicles principally designed for the transport of persons or goods, or fire fighting vehicles, and parts thereof:
Air compressors;
Bushings or sleeve bearings of bronze or powdered metal;
Commutator segments of copper;
Commutator insulating end rings;
Crankshaft thrust collars;
Diaphragms for fuel or vacuum pumps;
Door bumper shoes;
Electric shift control for two speed rear axles;
Gasket materials, other than materials of compressed asbestos and combinations of asbestos and synthetic rubber;
Graphited or oil impregnated bushings;
Helical spring lock washers of steel, of an internal diameter exceeding 38 mm, steel lock washers with internal or external teeth and other metal lock washers, other than of steel;
Ignition contact points;
Keys for shafting;
Lenses of glass for motor vehicle lamps or for light reflectors;
Magnetic plugs;
Metal frames for convertible soft tops;
Permanent mould pistons for brake master cylinders;
Propeller shaft tubes of steel bonded by rubber;
Rails of lock seam section, corners, locks and catches, and unplated ventilators, of metal other than aluminum, for use in the manufacture of window sashes for bus bodies;
Steel formed bottoms, metal grommets (flanges) or rings of steel, copper or brass, and blank layers of steel, for cylinder heads or manifold gaskets;
Spring locators, bulkheads, spring retainers and diaphragms for spring brakes;
Switches, relays, circuit breakers and solenoids and combinations thereof, including starter switch assemblies, other than automotive turn signal flasher units;
Synchronizing cones or blocking rings for transmissions;
Tapered discs of hot-rolled steel, with or without centre hole, for disc wheels;
Timing gear blanks of laminated composition plastics;
Vacuum, hydraulic or air control assemblies, other than assemblies for spring brakes;
Parts of the foregoing, other than:
Electric weld tubing and double wall copper brazed tubing, of an external diameter not exceeding 9.525 mm and wall thickness not exceeding 0.711 mm, for vacuum, hydraulic or air control assemblies;
Hydraulic brake hoses and hydraulic brake locks;
Hydraulic gear pumps to operate hoists and other accessories;
Manual slack adjusters for air brake systems;
Polyamide air brake tubing.
|
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-9960.00.00 |
| 9962.00.00
|
The following for use in the repair of road tractors for semi-trailers, motor vehicles principally designed for the transport of persons or goods, or fire fighting vehicles, and chassis therefor: Ammeters; Arm rests or wheel housing lining of indurated fibre, pressed to shape, other than for motor vehicles principally designed for the transport of less than ten persons or of goods; Automatic radiator shutter assemblies; Auxiliary transmission overdrive units and controls therefor; Axle housings, one piece welded; Bearing spring shackles; Carburators; Chassis frames and steel shapes, for the manufacture therefor; Cigar and cigarette lighters, whether or not in combination with a cigarette holder, including base; Composite frame and floor structure of metal, in the rough; Control ventilator gear box; Cylinder lock barrels, with or without sleeves and keys therefor; Dash heat indicators; Fluid couplings with or without drive plate assemblies; Gasoline, oil or air gauges; Grilles not plated, polished or not before assembly, and parts thereof not plated or polished after final forming, casting or piercing, not including finish or decorative mouldings; Hinges for bodies; Horns; Instrument bezel assemblies; Instrument board lamps; Instrument panel, glove compartment, luggage compartment, hood compartment or door step lamps and wire assemblies; Locks, electric ignition, steering gear, transmission, or combinations of such locks; Mouldings of metal, with nails or prongs set in position, lead filled or not; Ornaments or identification plates of metal, unplated, not including finish or decorative mouldings, other than for past models of motor vehicles principally designed for the transport of less than ten persons or of goods; Pipe lines of tubing, rigid, covered or not, with or without fittings, other than for the motor vehicles principally designed for the transport of less than ten persons or of goods; Radiator water gauges; Reclining seat mechanisms; Refill end discs for oil filters; Speedometers; Spring covers of metal and closing strips or shapes therefor; Stampings for bodies, cowls, door pillars, fenders, front ends, hoods, instrument boards, shields or baffles, of plain or coated metal, in the rough, trimmed or not, whether or not welded in any manner before final forming or piercing but not metal finished in any degree, including such stampings incorporating pierce or clinch nuts, but excluding such stampings for door pillars, shields and baffles for current models of motor vehicles principally designed for the transport of less than ten persons or of goods; Steering wheels, rims and spiders therefor, other than for current models of motor vehicles principally designed for the transport of less than ten persons or of goods; Sun visor blanks of gypsum weatherboard; Swivel seat mechanisms; Tachometers, with or without tachographs, electric or gear driven; Throttle, spark, choke or hood lock release assemblies; Torque converters; Universal joint ball assemblies, other than cross type; Windshield or window wipers; Parts of the foregoing, other than: Blades and refills for windshield or window wipers of motor vehicles principally designed for the transport of less than ten persons or of goods; Sintered powdered metal parts of auxiliary transmission overdrive units and controls therefor; Speedometer cables and speedometer cable and housing assemblies; Parts of thermostatic controls, other than power element cups, guides, pistons, pellets, valves, flanges, top frames, bottom frames and springs.
|
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-9961.00.00 |
| 9963.00.00
|
The following for use in the repair of road tractors for semi-trailers, motor vehicles for the transport of ten or more persons (including the driver), ambulances and hearses, motor vehicles for the transport of goods, or fire fighting vehicles, and chassis therefor, or for use in the manufacture of repair parts thereof:
Axles, front and rear;
Bell or clutch housings for vehicles having a g.v.w. exceeding 8.845 tonnes;
Brakes, other than brakes ranging in size from 381 mm by 76.2 mm to 419.1 mm by 177.8 mm, and air and hydraulic brakes for current model service of vehicles having a capacity not exceeding 1.82 tonnes;
Brake drums or linings;
Cast aluminum road wheels for tube type tires using rim sizes exceeding 508 mm by 203.2 mm or for tubeless type tires using rim sizes exceeding 571.5 mm by 209.55 mm;
Clutches, other than single plated clutches of a diameter not exceeding 330.2 mm;
Continuous control or constant velocity half-shaft drive shafts;
Hubs;
Hydraulic or fluid couplings, other than for motor vehicles for the transport of goods;
Internal combustion engines with a piston displacement exceeding 5,703.7 cm³;
Linkages and controls for use with clutches, transmission assemblies, power dividers or transfer cases;
Magnetos;
Power dividers or transfer cases;
Rims for pneumatic tires exceeding 508 mm by 190.5 mm for tube type tires, or exceeding 571.5 mm by 171.45 mm for tubeless tires;
Steel road wheels of a diameter exceeding 622.3 mm;
Steering drag links for vehicles having a g.v.w. of 9.072 tonnes or more;
Steering gears;
Tandem axle suspensions, excluding springs, other than for current models of motor vehicles for the transport of goods;
Transmission assemblies;
Parts of the foregoing, other than:
Axle housings and sintered powdered metal parts, for transmission assemblies;
Axle shafts for vehicles having a g.v.w. not exceeding 8.845 tonnes;
Brake shoe assembly kits;
Idler arms, tie rod assemblies and tie rod ends, for steering drag links of vehicles having a g.v.w. exceeding 9.072 tonnes;
Timing chains for internal combustion engines with a piston displacement exceeding 5,703.7 cm³. |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-9962.00.00 |
| 9964.00.00
|
Articles for use in the manufacture of snowmobiles (other than snowmobiles equipped for special services or functions). |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-9963.00.00 |
| 9965.00.00
|
Unserviceable vehicle parts for remanufacturing;
Articles for use in such remanufacturing. |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-9964.00.00 |
| 9966.00.00
|
The following vehicles, manufactured more than 25 years prior to the date of importation, and articles for use solely or principally with those vehicles:
Road tractors for semi-trailers;
Motor vehicles principally designed for the transport of persons or goods (other than vehicles specially designed for travelling on snow, golf cars and similar vehicles, and dumpers designed for off-highway use);
Fire fighting vehicles;
Motorcycles (including mopeds), cycles fitted with an auxiliary motor, and side cars. |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-9965.00.00 |
| 9967.00.00
|
Goods, other than seat covers of textile fabric, for use in aircraft, ground flying trainers, aircraft engines or airborne aircraft equipment, and parts thereof. |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-9966.00.00 |
htshub©