| 7213.99.00.1
|
Of circular cross section, containing by weight less than 0.25% of carbon: |
|
|
|
-- |
| 7213.99.00.11
|
Of a diameter of 14 mm or more but less than 19 mm |
KGM |
|
|
Compare-7213.99.00.1 |
| 7213.99.00.12
|
Of a diameter of 19 mm or more but not exceeding 25.5 mm |
KGM |
|
|
Compare-7213.99.00.11 |
| 7213.99.00.13
|
Of a diameter exceeding 25.5 mm |
KGM |
|
|
Compare-7213.99.00.12 |
| 7213.99.00.3
|
Of circular cross section, containing by weight 0.25% or more but less than 0.6% of carbon: |
|
|
|
Compare-7213.99.00.13 |
| 7213.99.00.31
|
Of a diameter of 14 mm or more but less than 19 mm |
KGM |
|
|
Compare-7213.99.00.3 |
| 7213.99.00.32
|
Of a diameter of 19 mm or more but not exceeding 25.5 mm |
KGM |
|
|
Compare-7213.99.00.31 |
| 7213.99.00.33
|
Of a diameter exceeding 25.5 mm |
KGM |
|
|
Compare-7213.99.00.32 |
| 7213.99.00.5
|
Of circular cross section, containing by weight 0.6% or more of carbon: |
|
|
|
Compare-7213.99.00.33 |
| 7213.99.00.51
|
Of a diameter of 14 mm or more but less than 19 mm |
KGM |
|
|
Compare-7213.99.00.5 |
| 7213.99.00.52
|
Of a diameter of 19 mm or more but not exceeding 25.5 mm |
KGM |
|
|
Compare-7213.99.00.51 |
| 7213.99.00.53
|
Of a diameter exceeding 25.5 mm |
KGM |
|
|
Compare-7213.99.00.52 |
| 7213.99.00.90
|
Other |
KGM |
|
|
Compare-7213.99.00.53 |
| 7214.10.00
|
Forged |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-7213.99.00.90 |
| 7214.10.00.00
|
Forged |
KGM |
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-7214.10.00 |
| 7214.20.00
|
Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-7214.10.00.00 |
| 7214.20.00.1
|
Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: |
|
|
|
Compare-7214.20.00 |
| 7214.20.00.11
|
With a maximum yield point of 400MPa |
KGM |
|
|
Compare-7214.20.00.1 |
| 7214.20.00.12
|
With a minimum yield point greater than 400MPa but not exceeding 500MPa |
KGM |
|
|
Compare-7214.20.00.11 |
| 7214.20.00.13
|
With a minimum yield point greater than 500MPa but not exceeding 600MPa |
KGM |
|
|
Compare-7214.20.00.12 |
htshub©