| 7214.20.00.14
|
With a minimum yield point greater than 600MPa |
KGM |
|
|
-- |
| 7214.20.00.2
|
Concrete reinforcing bar, of specification CSA G30.18, with a diameter of more than 12 mm but not exceeding 39 mm: |
|
|
|
Compare-7214.20.00.14 |
| 7214.20.00.21
|
With a maximum yield point of 400MPa |
KGM |
|
|
Compare-7214.20.00.2 |
| 7214.20.00.22
|
With a minimum yield point greater than 400MPa but not exceeding 500MPa |
KGM |
|
|
Compare-7214.20.00.21 |
| 7214.20.00.23
|
With a minimum yield point greater than 500MPa but not exceeding 600MPa |
KGM |
|
|
Compare-7214.20.00.22 |
| 7214.20.00.24
|
With a minimum yield point greater than 600MPa |
KGM |
|
|
Compare-7214.20.00.23 |
| 7214.20.00.3
|
Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm: |
|
|
|
Compare-7214.20.00.24 |
| 7214.20.00.31
|
With a maximum yield point of 400MPa |
KGM |
|
|
Compare-7214.20.00.3 |
| 7214.20.00.32
|
With a minimum yield point greater than 400MPa but not exceeding 500MPa |
KGM |
|
|
Compare-7214.20.00.31 |
| 7214.20.00.33
|
With a minimum yield point greater than 500MPa but not exceeding 600MPa |
KGM |
|
|
Compare-7214.20.00.32 |
| 7214.20.00.34
|
With a minimum yield point greater than 600MPa |
KGM |
|
|
Compare-7214.20.00.33 |
| 7214.20.00.90
|
Other |
KGM |
|
|
Compare-7214.20.00.34 |
| 7214.30.00
|
Other, of free-cutting steel |
|
Free |
CCCT, LDCT, GPT, UST, MXT, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, CEUT, UAT, CPTPT, UKT: Free |
Compare-7214.20.00.90 |
| 7214.30.00.10
|
Containing by weight 0.15% or more but not exceeding 0.35% of lead or 0.05% or more but not exceeding 0.4% of bismuth, for use in Canadian manufactures |
KGM |
|
|
Compare-7214.30.00 |
| 7214.30.00.2
|
Flat bars, including flat grader blade sections: |
|
|
|
Compare-7214.30.00.10 |
| 7214.30.00.24
|
Of a width not exceeding 76 mm |
KGM |
|
|
Compare-7214.30.00.2 |
| 7214.30.00.25
|
Of a width exceeding 76 mm but less than 152 mm |
KGM |
|
|
Compare-7214.30.00.24 |
| 7214.30.00.26
|
Of a width of 152 mm or more |
KGM |
|
|
Compare-7214.30.00.25 |
| 7214.30.00.3
|
Rounds: |
|
|
|
Compare-7214.30.00.26 |
| 7214.30.00.33
|
Of a diameter not exceeding 76 mm |
KGM |
|
|
Compare-7214.30.00.3 |
htshub©